The filter protects the internal parts of the pump should the fluids contain solid matter. M Pompe filters are made with a removable basket, a 0.5mm to 5mm grade of filtration, a domed bottom for easy cleaning and unloading of the shell, and a handle for easy carrying and handling. Hermetically sealed thanks to the O-Ring, whose materials can range from NBR, VITON, PTFE, EPDM, encapsulated FEP, KALREZ, according to the type of fluid which needs to be pumped and the pumping temperature. Our filters are made entirely in AISI 304 or AISI 316 to satisfy any application, from resins to paints containing corrosive liquids, to the food industry. The filter can also be provided with a clogging indicator, which is designed to monitor the condition of the basket.
Technical Features:
Grade of filtration: da 0,5mm up to 5mm
Flow rate: up to 65m^3/h
In/out: from DN 25 to DN 150 with the option of installing flange EN 1092-1.

The Trolley, made entirely in AISI 304, has been specifically designed to make moving electric pumps in the work place easier.
The ergonomic stainless-steel construction guarantees the maximum strength and versatility.
It can be equipped with rubber wheels to provide maximum friction, or Teflon wheels, as is best suited to the work place.
Various versions are available according to the size of the pump.

The trolley with on-board frequency inverter is the best solution for controlling pump performance.
The inverter controller allows the motor frequency and, consequently, the rotational speed of the pump to be adjusted, thus regulating the necessary flow rate.
The inverter allows you to regulate the workings of the electric pump:

• Starting
• Stopping
• Reversing
• Regulating frequency (shown on a display found on the inverter)

M Pompe electric pumps and filters can be suited with a wide selection of flanges in accordance with EN 1092-1 in carbon steel or stainless steel, depending on the needs of the client:

• Plate flanges for welding
• Raised face flanges for welding
• Flange with weld-neck collar
• Loose plate flanges

The function of the by-pass valve is to prevent damage to the pumping devices and the system, which can be caused by excessive pressure generated when the delivery valve is closed or the pipes clogged.
The by-pass valve found in M Pompe pumps is bidirectional and regulatable according to the system requirements.
By regulating the adjustment screws found on the extremities, you alter the balancing forces on the shutter and modify the pressure.
We also supply by-pass valves in cast iron, AISI 304, AISI 316, for applications in which state-of-the-art heat treatments are required, thus improving the tribology of the material.

The heating jacket is a necessary component for fluids that are solid at room temperature and therefore need to be kept at high temperature to be transferred.
M Pompe supplies this component which, by way of a connection to the steam or hot water line of the system and special channels on the pump, allows the transfer of fluids such as fats, lard, and tallow.

The expansion vessel is used to absorb and store the energy of a pressurised liquid, thus preventing vibrations on pipes which would be damaging to the system.
The pressurised air inside the dampener forms a cushion which, being in direct contact with the process fluid, allows it to compensate variations in volume and absorb the energy of the fluid which would otherwise become vibrations along the system line.
M Pompe supplies this component in various materials: carbon steel or S235 JR, AISI 304, AISI 316, depending on where it will be installed.Technical Features:
Capacity: up to 50 l
Discharge pressure: up to 16 bar
Temperature: up to 100°C
In/out: GAS threads – flanges DN 25 to DN 150 with the possibility of installation in accordance with EN 1092-1